Standard Lanshan 1 and 2 tents are factory seam-sealed. Lanshan 1 Pro and 2 Pro use double-coated silicone fabric and cannot be machine-sealed, so you need to seal the seams yourself or add the £23 service. Do it before the first wet trip; a dry seam is not a sealed seam.
Why the Pro models need sealing
The Pro fly is made from double-coated silicone fabric. The coating is what makes it light and strong, but it also means the seams cannot be taped or machine-sealed at the factory in the same way as the standard tents. The stitching holes are a potential water path. Seam sealing fills those holes with a flexible silicone layer.

When to seal
- Before the first wet trip, not after you get wet.
- If the existing sealant is flaking, cracked or worn.
- If water beads on the fly but seeps through the seams.
- If you have repaired a seam or added a modification.
What you need
- Silicone seam sealer compatible with silnylon/silpoly — check the label
- Isopropyl alcohol and a clean cloth
- Small brush or applicator
- Gloves; work in shade, not direct sun
- 24 hours to cure (follow the sealer’s instructions)
Step-by-step
- Pitch the tent so the seams are under gentle tension. Clean, dry weather is best.
- Clean the seams with isopropyl alcohol and let them dry. Dirt stops the sealer bonding.
- Apply a thin coat to the outside of the seam, working it into the stitching. Do not leave puddles; thick blobs crack.
- Check the high-wear areas: guy-line attachments, peg points and the ridge seam.
- Cure for 24 hours in a dry, shaded place. A second thin coat may be needed on porous seams.
- Water-test before your trip. If water still seeps, add a thin second coat and cure again.
What not to do
- Do not use a PU seam sealer on silicone-coated fabric without checking compatibility.
- Do not seal in direct sun or high humidity; the sealer may blush or fail to bond.
- Do not apply a thick layer to “be safe”; thin coats flex better.
- Do not seal the standard Lanshan 1/2 seams unless they are damaged; they are already factory sealed.
If you do not want to DIY
The £23 seam-sealing service covers Lanshan 1/2 Pro. It is the simplest option if you are not confident with silicone or do not have a dust-free space to cure the tent.
FAQ
Do all Lanshan tents need seam sealing? No. Standard Lanshan 1 and 2 are factory seam-sealed. The 1 Pro and 2 Pro need it.
Can I use standard tent seam sealer? Only if it is compatible with silicone-coated fabric. Check the label or use a silicone-specific sealer.
How long does it take? About 30–60 minutes to apply, plus 24 hours to cure.

Hinterlasse einen Kommentar
Diese Website ist durch hCaptcha geschützt und es gelten die allgemeinen Geschäftsbedingungen und Datenschutzbestimmungen von hCaptcha.