3F UL Gear

Lanshan Condensation: Why It Happens and 7 Fixes

Quick answer

Condensation is normal: warm, moist air from you and your gear meets a cooler fly and turns into water droplets. It is not a leak. You can reduce it by pitching for airflow, opening vents, keeping wet gear out of the inner, and choosing a double-wall tent for damp UK nights. The 1.5-layer Pro models are lighter but less forgiving.

Why it happens

You exhale water vapour all night. Cooking, wet clothes and a damp mat add more. When that moist air touches the colder fly, it condenses. A single-wall or 1.5-layer tent puts that water closer to you; a double-wall tent gives you an inner layer of separation. Neither design eliminates condensation.

Lanshan Condensation

7 fixes that actually help

  1. Pitch for airflow. Avoid a hollow, a dense hedge or a spot completely screened from wind. A little air movement is better than a perfectly sheltered pool of damp air.
  2. Open the vents. Keep the fly vents open even when it is cool. A closed tent traps moisture.
  3. Leave the inner door ajar. A small gap improves circulation; use the mesh if insects are an issue.
  4. Keep wet gear out of the inner. Wet boots, jackets and packs belong in the vestibule.
  5. Do not cook inside. Besides the safety risk, cooking adds a lot of moisture.
  6. Wipe the fly before packing. A microfibre cloth removes droplets before they soak your gear.
  7. Choose double-wall for UK damp. If condensation bothers you, the standard Lanshan 1/2 is the more forgiving choice than the 1.5-layer Pro.

Double-wall vs 1.5-layer

The standard Lanshan 1/2 has a separate inner. Condensation forms on the fly; the inner keeps most of it away from your sleeping bag. The 1 Pro/2 Pro are 1.5-layer: lighter and more packable, but the fly is closer to you. In still, damp conditions, you will notice more condensation in the Pro. That is the trade-off, not a defect.

When it is a leak, not condensation

Condensation is droplets on the inside of the fly, usually near the top or where the fly is coldest. A leak is water coming through a seam, a zip or a peg point, often in a steady stream or a localized wet patch. If the seam is the source, seal it (Pro) or check the factory seal (standard). If water comes through the fabric itself, clean and re-proof it.

Does a footprint help?

A footprint protects the floor and reduces ground moisture wicking through, but it does not stop condensation on the fly. It is still worth using on rough or wet ground; just do not expect it to solve a ventilation problem.

FAQ

Is condensation in a Lanshan normal? Yes, especially on still, damp UK nights. It is not a sign that the tent is faulty.

Does the double-wall Lanshan stop condensation? No, but it keeps most of the water away from the inner, which is more comfortable.

Should I seal the seams to stop condensation? No. Seam sealing stops leaks through stitching; it does not stop condensation.

Читать далее

Оставить комментарий

Этот веб-сайт защищается hCaptcha. Применяются Политика конфиденциальности и Условия использования hCaptcha.