Condensation is normal: warm, moist air from you and your gear meets a cooler fly and turns into water droplets. It is not a leak. You can reduce it by pitching for airflow, opening vents, keeping wet gear out of the inner, and choosing a double-wall tent for damp UK nights. The 1.5-layer Pro models are lighter but less forgiving.
Why it happens
You exhale water vapour all night. Cooking, wet clothes and a damp mat add more. When that moist air touches the colder fly, it condenses. A single-wall or 1.5-layer tent puts that water closer to you; a double-wall tent gives you an inner layer of separation. Neither design eliminates condensation.

7 fixes that actually help
- Pitch for airflow. Avoid a hollow, a dense hedge or a spot completely screened from wind. A little air movement is better than a perfectly sheltered pool of damp air.
- Open the vents. Keep the fly vents open even when it is cool. A closed tent traps moisture.
- Leave the inner door ajar. A small gap improves circulation; use the mesh if insects are an issue.
- Keep wet gear out of the inner. Wet boots, jackets and packs belong in the vestibule.
- Do not cook inside. Besides the safety risk, cooking adds a lot of moisture.
- Wipe the fly before packing. A microfibre cloth removes droplets before they soak your gear.
- Choose double-wall for UK damp. If condensation bothers you, the standard Lanshan 1/2 is the more forgiving choice than the 1.5-layer Pro.
Double-wall vs 1.5-layer
The standard Lanshan 1/2 has a separate inner. Condensation forms on the fly; the inner keeps most of it away from your sleeping bag. The 1 Pro/2 Pro are 1.5-layer: lighter and more packable, but the fly is closer to you. In still, damp conditions, you will notice more condensation in the Pro. That is the trade-off, not a defect.
When it is a leak, not condensation
Condensation is droplets on the inside of the fly, usually near the top or where the fly is coldest. A leak is water coming through a seam, a zip or a peg point, often in a steady stream or a localized wet patch. If the seam is the source, seal it (Pro) or check the factory seal (standard). If water comes through the fabric itself, clean and re-proof it.
Does a footprint help?
A footprint protects the floor and reduces ground moisture wicking through, but it does not stop condensation on the fly. It is still worth using on rough or wet ground; just do not expect it to solve a ventilation problem.
FAQ
Is condensation in a Lanshan normal? Yes, especially on still, damp UK nights. It is not a sign that the tent is faulty.
Does the double-wall Lanshan stop condensation? No, but it keeps most of the water away from the inner, which is more comfortable.
Should I seal the seams to stop condensation? No. Seam sealing stops leaks through stitching; it does not stop condensation.

Zostaw komentarz
Ta strona jest chroniona przez hCaptcha i obowiązują na niej Polityka prywatności i Warunki korzystania z usługi serwisu hCaptcha.