Standard Lanshan 1 and 2 tents are factory seam-sealed. Lanshan 1 Pro and 2 Pro use double-coated silicone fabric and cannot be machine-sealed, so you need to seal the seams yourself or add the £23 service. Do it before the first wet trip; a dry seam is not a sealed seam.
Why the Pro models need sealing
The Pro fly is made from double-coated silicone fabric. The coating is what makes it light and strong, but it also means the seams cannot be taped or machine-sealed at the factory in the same way as the standard tents. The stitching holes are a potential water path. Seam sealing fills those holes with a flexible silicone layer.

When to seal
- Before the first wet trip, not after you get wet.
- If the existing sealant is flaking, cracked or worn.
- If water beads on the fly but seeps through the seams.
- If you have repaired a seam or added a modification.
What you need
- Silicone seam sealer compatible with silnylon/silpoly — check the label
- Isopropyl alcohol and a clean cloth
- Small brush or applicator
- Gloves; work in shade, not direct sun
- 24 hours to cure (follow the sealer’s instructions)
Step-by-step
- Pitch the tent so the seams are under gentle tension. Clean, dry weather is best.
- Clean the seams with isopropyl alcohol and let them dry. Dirt stops the sealer bonding.
- Apply a thin coat to the outside of the seam, working it into the stitching. Do not leave puddles; thick blobs crack.
- Check the high-wear areas: guy-line attachments, peg points and the ridge seam.
- Cure for 24 hours in a dry, shaded place. A second thin coat may be needed on porous seams.
- Water-test before your trip. If water still seeps, add a thin second coat and cure again.
What not to do
- Do not use a PU seam sealer on silicone-coated fabric without checking compatibility.
- Do not seal in direct sun or high humidity; the sealer may blush or fail to bond.
- Do not apply a thick layer to “be safe”; thin coats flex better.
- Do not seal the standard Lanshan 1/2 seams unless they are damaged; they are already factory sealed.
If you do not want to DIY
The £23 seam-sealing service covers Lanshan 1/2 Pro. It is the simplest option if you are not confident with silicone or do not have a dust-free space to cure the tent.
FAQ
Do all Lanshan tents need seam sealing? No. Standard Lanshan 1 and 2 are factory seam-sealed. The 1 Pro and 2 Pro need it.
Can I use standard tent seam sealer? Only if it is compatible with silicone-coated fabric. Check the label or use a silicone-specific sealer.
How long does it take? About 30–60 minutes to apply, plus 24 hours to cure.

Zostaw komentarz
Ta strona jest chroniona przez hCaptcha i obowiązują na niej Polityka prywatności i Warunki korzystania z usługi serwisu hCaptcha.